View SXX08DS2_8830919.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

? 2016 littelfuse, inc. specifcations are subject to change without notice. revised: 05/02/16 sxx08xsx & sxx08x series description excellent unidirectional switches for phase control applications such as heating and motor speed controls. sensitive gate scrs are easily triggered with microamps of current as furnished by sense coils, proximity switches, and microprocessors. standard phase control scrs are triggered with few milliamperes of current at less than 1.5v potential. features & benefts ? rohs compliant ? glass C passivated junctions ? voltage capability up to 1000 v ? surge capability up to 100 a main features symbol value unit i t(rms) 8 a v drm /v rrm 400 to 1000 v i gt 0.2 to 15 ma schematic symbol agency approval agency agency file number l package: e71639 applications typical applications are capacitive discharge systems for strobe lights, nailers, staplers and gas engine ignition. also controls for power tools, home/brown goods and white goods appliances. internally constructed isolated packages are offered for ease of heat sinking with highest isolation voltage. r ohs additional information datasheet samples resources teccor ? brand thyristors 8 amp sensitive & standard scrs
? 2016 littelfuse, inc. specifcations are subject to change without notice. revised: 05/02/16 absolute maximum ratings standard scrs symbol parameter test conditions value unit i t(rms) rms on-state current sxx08l t c = 100c 8 a sxx08r sxx08d sxx08v t c = 110c i t(av) average on-state current sxx08l t c = 100c 5.1 a sxx08r sxx08d sxx08v t c = 110c i tsm peak non-repetitive surge current single half cycle; f = 50hz; t j (initial) = 25c 83 a single half cycle; f = 60hz; t j (initial) = 25c 100 i 2 t i 2 t value for fusing t p = 8.3 ms 41 a 2 s di/dt critical rate-of-rise of on-state current f = 60 hz t j = 125c 100 a/s i gm peak gate current t j = 125c 2 a p g(av) average gate power dissipation t j = 125c 0.5 w t stg storage temperature range -40 to 150 c t j operating junction temperature range -40 to 125 c note: xx = voltage absolute maximum ratings sensitive scrs symbol parameter test conditions value unit i t(rms) rms on-state current sxx08lsy t c = 80c 8 a sxx08rsy sxx08dsy sxx08vsy t c = 95c i t(av) average on-state current sxx08lsy t c = 80c 5.1 a sxx08rsy sxx08dsy sxx08vsy t c = 95c i tsm peak non-repetitive surge current single half cycle; f = 50hz; t j (initial) = 25c 83 a single half cycle; f = 60hz; t j (initial) = 25c 100 i 2 t i 2 t value for fusing t p = 8.3 ms 41 a 2 s di/dt critical rate of rise of on-state current f = 60 hz ; t j = 110c 70 a/s i gtm peak gate current t j = 110c 1. 6 a p g(av) average gate power dissipation t j = 110c 0.4 w t stg storage temperature range -40 to 150 c t j operating junction temperature range -40 to 110 c note: xx = voltage, y = sensitivity teccor ? brand thyristors 8 amp sensitive & standard scrs
? 2016 littelfuse, inc. specifcations are subject to change without notice. revised: 05/02/16 electrical characteristics (t j = 25c, unless otherwise specifed) C sensitive scrs symbol test conditions value unit sxx08xs2 sxx08xs3 i gt v d = 6v r l = 100 max. 200 500 a v gt v d = 6v r l = 100 max. 0.8 v dv/dt v d = v drm ; r gk = 1k?; t j = 110c typ. 8 v/s v gd v d = v drm r l = 3.3 k t j = 110c min. 0.2 v v grm i gr = 10a min. 6 v i h i t = 20ma (initial) max. 6 8 ma t q i t =2a; t p =50s; dv/dt=5v/s; di/dt=-30a/s max. 50 45 s t gt i g = 2 x i gt pw = 15s i t = 12a typ. 4 5 s note: xx = voltage x = package electrical characteristics (t j = 25c, unless otherwise specifed) C standard scrs symbol test conditions value unit sxx08x i gt v d = 12v r l = 60 max. 15 ma v gt v d = 12v r l = 60 max. 1. 5 v dv/dt v d = v drm ; gate open; t j = 100c 400v min. 350 v/s 600v 300 800v 250 1000v 100 v d = v drm ; gate open; t j = 125c 400v 250 600v 225 800v 200 v gd v d = v drm r l = 3.3 k t j = 125c min. 0.2 v i h i t = 200ma (initial) max. 30 ma t q i t =2a; t p =50s; dv/dt=5v/s; di/dt=-30a/s max. 35 s t gt i g = 2 x i gt pw = 15s i t = 16a typ. 2 s note: xx = voltage x = package static characteristics symbol test conditions value unit v tm i t = 16a; t p = 380 s max. 1. 6 v i drm / i rrm v drm = v rrm sxx08xyy t j = 25c 400 - 600v max. 5 a t j = 110c 400 - 600v 250 sxx08x t j = 25c 400 - 800v 10 1000v 20 t j = 100c 400 - 800v 200 1000v 3000 t j = 125c 400 - 800v 500 note: xx = voltage, x = package, yy = sensitivity teccor ? brand thyristors 8 amp sensitive & standard scrs
? 2016 littelfuse, inc. specifcations are subject to change without notice. revised: 05/02/16 thermal resistances symbol parameter value unit r (j-c) junction to case (ac) sxx08rsy 1. 8 c/w sxx08lsy 3.4 sxx08vsy 2.1 sxx08dsy 1. 5 sxx08r 1. 8 sxx08l 3.4 sxx08v 2.0 sxx08d 1. 5 r (j-a) junction to ambient sxx08rsy 40 c/w sxx08lsy 65 sxx08vsy 85 sxx08r 40 sxx08l 50 sxx08v 70 note: xx = voltage, y = sensitivity figure 1: normalized dc gate trigger current vs. junction temperature (sensitive scr) figure 2: normalized dc gate trigger current vs. junction temperature (standard scr) 0.0 1.0 2.0 3.0 4.0 -40 -15 10 35 60 85 110 junction temperature (t j ) - (c) ratio of i gt / i gt (t j = 25c ) 125 0.0 1.0 2.0 3.0 4.0 -40 -15 10 35 60 85 110 junction temperature (t j ) - (c) ratio of i gt / i gt (t j = 25c) teccor ? brand thyristors 8 amp sensitive & standard scrs
? 2016 littelfuse, inc. specifcations are subject to change without notice. revised: 05/02/16 figure 5: on-state current vs. on-state voltage (typical) figure 6: power dissipation (typical) vs. rms on-state current 0 1 2 3 4 5 6 7 8 rms on-stat e curr ent [i t(rms) ] - (amps) av er ag e on-stat e po w er dissipation [p d(a v) ] -- (w at ts) 0 1 2 3 4 5 6 7 8 125 0.0 0.5 1.0 1.5 2.0 -40 -15 10 35 60 85 110 junction t emper at ur e (t j ) - (c) ratio of v gt / v gt (t j = 25c) figure 3: normalized dc gate trigger voltage vs. junction temperature figure 4: normalized dc holding current vs. junction temperature 125 0.0 0.5 1.0 1.5 2.0 -40 -15 10 35 60 85 110 junction t emper at ur e (t j ) - (c) ratio of i h / i h (t j = 25c) 0 4 8 12 16 20 24 28 32 0.7 0.8 0.9 1 .0 1 .1 1 .2 1 .3 1 .4 1 .5 1. 6 instantaneous on-stat e v oltag e (v t ) ? v olts instantaneous on-stat e cur r ent (i t ) ? amps t j = 25c figure 7: maximum allowable case temperature vs. rms on-state current figure 8: maximum allowable case temperature vs. average on-state current 80 85 90 95 10 0 10 5 11 0 11 5 12 0 12 5 13 0 sx08ls y sxx08r sy sxx08ds y sxx08vs y current wa veform: sinusoidal lo ad: resistiv e or inductiv e conduction angle: 1 80 free air ra ting av er ag e on-stat e cur r ent [i t(av e) ] - amps maximum allowa ble case t emper at ur e (t c ) - c sxx08r sxx08d sxx08v 0 1 23 4 5 sxx08l 80 85 90 95 100 105 110 115 120 125 130 0 1 2 3 4 5 6 7 8 9 sxx08rsy sxx08dsy sxx08vsy sxx08r sxx08d sxx08v sxx08lsy sxx08l current wa veform: sinusoidal lo ad: resistiv e or inductiv e conduction angle: 1 80 free air ra ting rms on-stat e cur r ent [i t(rms) ] - amps maximum allo w able case t emper at ur e (t c ) - c teccor ? brand thyristors 8 amp sensitive & standard scrs
? 2016 littelfuse, inc. specifcations are subject to change without notice. revised: 05/02/16 figure 9: maximum allowable ambient temperature vs. rms on-state current 0 20 40 60 80 10 0 12 0 sxx08r sxx08l sxx08v sxx08r sy sxx08ls y 0.0 0.5 1 .0 1 .5 2.0 2. 5 rms on-stat e cur r ent [i t(rms) ] - amps maximum allowable ambient t emper at ur e (t a ) - c current wa veform: sinusoidal lo ad: resistiv e or inductiv e conduction angle: 1 80 free air ra ting sxx08vs y figure 10: maximum allowable ambient temperature vs. average on-state current 0 20 40 60 80 10 0 12 0 5 . 1 0 . 1 5 . 0 0 . 0 sxx08v sxx08r sxx08vs y av er ag e on-stat e cur r ent [i t(av e) ] - amps maximum allowable ambient t emper at ur e (t a ) - c current wa veform: sinusoidal lo ad: resistiv e or inductiv e conduction angle: 1 80 free air ra ting sxx08r sy sxx08ls y sxx08l note: xx = voltage, y = sensitivity 1 10 100 0 0 0 1 0 0 1 0 1 1 surge current duration -- full cycles peak surge (non-repetitive)on-state current (i tsm ) ? amps figure 13: surge peak on-state current vs. number of cycles supply frequency: 60 hz sinusoidal load: resistive rms on-state current: [i t(rms) ]: maximum rated value at specifed case temperature notes: 1. gate control may be lost during and immediately following surge current interval. 2. overload may not be repeated until junction temperature has returned to steady-state rated value. figure 11: peak capacitor discharge current figure 12: peak capacitor discharge current derating 0.0 0.2 0.4 0.6 0.8 1. 0 1. 2 nor maliz ed p eak cur r ent sensitiv e scr 0 25 50 75 10 0 1 25 15 0 case t emper at ur e (t c ) - c standar d scr 10 10 0 1 000 0 . 0 5 0 . 10 5 . 0 pulse cur r ent dur ation (t w ) - ms pe ak disc ha rg e cu rr ent (i tm ) - amp s i trm t w 1. 0 teccor ? brand thyristors 8 amp sensitive & standard scrs
? 2016 littelfuse, inc. specifcations are subject to change without notice. revised: 05/02/16 soldering parameters refow condition pb C free assembly pre heat - temperature min (t s(min) ) 150c - temperature max (t s(max) ) 200c - time (min to max) (t s ) 60 C 180 secs average ramp up rate (liquidus temp) (t l ) to peak 5c/second max t s(max) to t l - ramp-up rate 5c/second max refow - temperature (t l ) (liquidus) 217c - temperature (t l ) 60 C 150 seconds peak temperature (t p ) 260 +0/-5 c time within 5c of actual peak temperature (t p ) 20 C 40 seconds ramp-down rate 5c/second max time 25c to peak temperature (t p ) 8 minutes max. do not exceed 280c physical specifcations environmental specifcations test specifcations and conditions ac blocking mil-std-750, m-1040, cond a applied peak ac voltage @ 125c for 1008 hours temperature cycling mil-std-750, m-1051, 100 cycles; -40c to +150c; 15-min dwell-time temperature/ humidity eia / jedec, jesd22-a101 1008 hours; 320v - dc: 85c; 85% rel humidity high temp storage mil-std-750, m-1031, 1008 hours; 150c low-temp storage 1008 hours; -40c resistance to solder heat mil-std-750 method 2031 solderability ansi/j-std-002, category 3, test a lead bend mil-std-750, m-2036 cond e terminal finish 100% matte tin-plated body material ul recognized epoxy meeting fammability classifcation 94v-0 lead material copper alloy design considerations careful selection of the correct device for the applications operating parameters and environment will go a long way toward extending the operating life of the thyristor. good design practice should limit the maximum continuous current through the main terminals to 75% of the device rating. other ways to ensure long life for a power discrete semiconductor are proper heat sinking and selection of voltage ratings for worst case conditions. overheating, overvoltage (including dv/dt), and surge currents are the main killers of semiconductors. correct mounting, soldering, and forming of the leads also help protect against component damage. ti me te mperature t p t l t s(max) t s(min) 25 t p t l t s time to peak temperature preheat p r e h eat ramp-up ramp-up ramp-down r am p - do teccor ? brand thyristors 8 amp sensitive & standard scrs
? 2016 littelfuse, inc. specifcations are subject to change without notice. revised: 05/02/16 dimensions to-220ab (r-package) non-isolated mounting tab common with center lead dimension inches millimeters min max min max a 0.380 0.420 9.65 10.67 b 0.105 0.115 2.67 2.92 c 0.230 0.250 5.84 6.35 d 0.590 0.620 14.99 15.75 e 0.142 0.147 3.61 3.73 f 0.110 0.130 2.79 3.30 g 0.540 0.575 13.72 14.61 h 0.025 0.035 0.64 0.89 j 0.195 0.205 4.95 5.21 k 0.095 0.105 2.41 2.67 l 0.060 0.075 1.52 1.91 m 0.085 0.095 2.16 2.41 n 0.018 0.024 0.46 0.61 o 0.178 0.188 4.52 4.78 p 0.045 0.060 1. 14 1.52 r 0.038 0.048 0.97 1.22 k j a h g b f e c d l r t c mea suring poin t anode o p n m .27 6 7. 01 .526 1 3.36 .320 8.1 3 area (ref .) 0.1 7 in 2 no tch in ga te lead to id. non-isola ted ta b ga te ca thode anode dimensions to-220ab (l-package) isolated mounting tab dimension inches millimeters min max min max a 0.380 0.420 9.65 10.67 b 0.105 0.115 2.67 2.92 c 0.230 0.250 5.84 6.35 d 0.590 0.620 14.99 15.75 e 0.142 0.147 3.61 3.73 f 0.110 0.130 2.79 3.30 g 0.540 0.575 13.72 14.61 h 0.025 0.035 0.64 0.89 j 0.195 0.205 4.95 5.21 k 0.095 0.105 2.41 2.67 l 0.060 0.075 1.52 1.91 m 0.085 0.095 2.16 2.41 n 0.018 0.024 0.46 0.61 o 0.178 0.188 4.52 4.78 p 0.045 0.060 1. 14 1.52 r 0.038 0.048 0.97 1.22 a h g b f e c d l r t c mea suring poin t area (ref .) 0.1 7 in 2 o p n m .320 8.1 3 .526 1 3.36 .27 6 7. 01 k j ga te ca thode anode note: maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 nm). note: maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 nm). teccor ? brand thyristors 8 amp sensitive & standard scrs
? 2016 littelfuse, inc. specifcations are subject to change without notice. revised: 05/02/16 dimensions to-251aa (v/i-package) v/i-pak through hole dimension inches millimeters min typ max min typ max a 0.037 0.040 0.043 0.94 1. 01 1.09 b 0.235 0.242 0.245 5.97 6.15 6.22 c 0.350 0.361 0.375 8.89 9.18 9.53 d 0.205 0.208 0.213 5.21 5.29 5.41 e 0.255 0.262 0.265 6.48 6.66 6.73 f 0.027 0.031 0.033 0.69 0.80 0.84 g 0.087 0.090 0.093 2.21 2.28 2.36 h 0.085 0.092 0.095 2.16 2.34 2.41 i 0.176 0.180 0.184 4.47 4.57 4.67 j 0.018 0.020 0.023 0.46 0.51 0.58 k 0.035 0.037 0.039 0.90 0.95 1. 0 0 l 0.018 0.020 0.023 0.46 0.52 0.58 p 0.042 0.047 0.052 1.06 1.20 1.32 q 0.034 0.039 0.044 0.86 1. 0 0 1. 11 r 0.034 0.039 0.044 0.86 1. 0 0 1. 11 s 0.074 0.079 0.084 1.86 2.00 2.11 area: 0.040 in 2 t c mea suring poin t ga te g i e d a b c f j h k l 5.28 .208 5.34 .21 0 anode cathode anode p q r s dimensions to-252aa (d-package) d-pak surface mount dimension inches millimeters min ty p max min ty p max a 0.037 0.040 0.043 0.94 1. 01 1.09 b 0.235 0.243 0.245 5.97 6.16 6.22 c 0.106 0.108 0.113 2.69 2.74 2.87 d 0.205 0.208 0.213 5.21 5.29 5.41 e 0.255 0.262 0.265 6.48 6.65 6.73 f 0.027 0.031 0.033 0.69 0.80 0.84 g 0.087 0.090 0.093 2.21 2.28 2.36 h 0.085 0.092 0.095 2.16 2.33 2.41 i 0.176 0.179 0.184 4.47 4.55 4.67 j 0.018 0.020 0.023 0.46 0.51 0.58 k 0.035 0.037 0.039 0.90 0.95 1. 0 0 l 0.018 0.020 0.023 0.46 0.51 0.58 m 0.000 0.000 0.004 0.00 0.00 0.10 n 0.021 0.026 0.027 0.53 0.67 0.69 o 0 0 5 0 0 5 p 0.042 0.047 0.052 1.06 1.20 1.32 q 0.034 0.039 0.044 0.86 1. 0 0 1. 11 m o n h j l k .1 18 3 .063 1 .60 .071 1 .80 .264 6.71 .264 6.71 .1 81 4.60 ga te anode cathode anode t c mea suring poin t g i d e a b c f 5.28 .208 5.34 .21 0 : 0.040 in 2 area p q teccor ? brand thyristors 8 amp sensitive & standard scrs
? 2016 littelfuse, inc. specifcations are subject to change without notice. revised: 05/02/16 product selector part number voltage gate sensitivity type package 400v 600v 800v 1000v sxx08rs2 x x 0.2ma sensitive scr to-220r sxx08ls2 x x 0.2ma sensitive scr to-220l sxx08vs2 x x 0.2ma sensitive scr to-251 SXX08DS2 x x 0.2ma sensitive scr to-252 sxx08rs3 x x 0.5ma sensitive scr to-220r sxx08ls3 x x 0.5ma sensitive scr to-220l sxx08vs3 x x 0.5ma sensitive scr to-251 sxx08ds3 x x 0.5ma sensitive scr to-252 sxx08r x x x x 15ma standard scr to-220r sxx08l x x x x 15ma standard scr to-220l sxx08v x x x x 15ma standard scr to-251 sxx08d x x x x 15ma standard scr to-252 note: xx = voltage packing options part number marking weight packing mode base quantity sxx08l/ryytp sxx08l/ryy 2.2 g tube 500 (50 per tube) sxx08dyytp sxx08dyy 0.3 g tube 750 (75 per tube) sxx08dyyrp sxx08dyy 0.3 g embossed carrier 2500 sxx08vyytp sxx08vyy 0.4 g tube 750 (75 per tube) sxx08l/rtp sxx08l/r 2.2 g tube 500 (50 per tube) sxx08dtp sxx08d 0.3 g tube 750 (75 per tube) sxx08drp sxx08d 0.3 g embossed carrier 2500 sxx08vtp sxx08v 0.4 g tube 750 (75 per tube) note: xx = voltage; yy = sensitivity teccor ? brand thyristors 8 amp sensitive & standard scrs
? 2016 littelfuse, inc. specifcations are subject to change without notice. revised: 05/02/16 0.51 2 (1 3.0) arbor hole diameter dc xxxxxx xxxxxx dc xxxxxx dc xxxxxx xx gate cathode anode 0.63 (1 6.0) 0.1 57 (4.0) 0.64 (1 6.3) 1 2.99 (330.0) 0.524 (1 3.3) 0.31 5 (8.0) 0.059 dia (1 .5) * * co ver tape xx xx direction of f eed dimensions are in inc hes (and millimeter s). to-252 embossed carrier reel pack (rp) specifcations meets all eia-481-2 standards part numbering system part marking system s 60 08 l s2 56 device type s: scr voltage ratin g 40: 400v 60: 600v 80: 800v k0: 1000 v current ratin g 08: 8a sensitivity & type sensitive scr: s2: 200a s3: 500a standard scr: (blank): 15ma package type l: to-220 isolated r: to-220 non-isolated v: to-251 (v/i-pak ) d: to-252 (d-pak ) lead form dimensions xx: lead form option s6008f 1 y xxxx to-202 ty pe 1 (f package) ? ? mxxx y s6008rs 2 t o-220 ab - (l and r pa ck age) date code marking y:year code m: month code xxx: lot trace code s6008ds2 ymldd ? date code marking y:year code m: month code l: location code dd: calendar code s6008ds2 ymldd ? t o-251aa - (v pa ck age) t o-252aa - (d pa ck age) s6008f 1 y xxxx to-202 ty pe 1 (f package) ? ? mxxx y s6008rs 2 t o-220 ab - (l and r pa ck age) date code marking y:year code m: month code xxx: lot trace code s6008ds2 ymldd ? date code marking y:year code m: month code l: location code dd: calendar code s6008ds2 ymldd ? t o-251aa - (v pa ck age) t o-252aa - (d pa ck age) teccor ? brand thyristors 8 amp sensitive & standard scrs

▲Up To Search▲

Price & Availability of SXX08DS2

	To Download SXX08DS2 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .